Well Testing Downhole Drill Stem Testing(DST) Tools
A properly conducted well test is a temporary completion of a well to acquire dynamic rate through time, pressure, and fluid property data. The well test often indicates how the well will perform when it is subjected to various flow conditions. An analysis is usually performed on the data to determine reservoir parameters and
characteristics. Production decline may be predicted using these parameters and characteristics. The production decline can be used to predict cash flow. Once cash flow is known, improved drilling, completion, and production decisions can be made on this well and other wells in the field. Well test objectives can be classified as short term or long term.
• Short-term well test objectives typically involve gathering and analyzing sufficient well data to obtain a description of the reservoir system in the vicinity of the wellbore.
• Long-term well test objectives focus on gathering and analyzing data to obtain a complete description of the reservoir. The test time required to satisfy the test objectives varies for each reservoir. These test times are directly related to the testing costs and data needed.
The well testing and sampling operation is typically accomplished with an assortment of test tools. The basic downhole test tools required for a well test include:
• Reversing valve
• Tester valve
• Samplers
• Gauges (pressure and temperature recorders)
• Packer
• Tubing conveyed perforating guns
OMIN Circulating Valve/Multi Cycle Circulating Valve
OMNI circulating valve is a full opening, annulus pressureoperated re-closable circulating valve which can be open and closed many times. The tool is operated by repeatedly cycling the annulus pressure up to a predetermined value and then releasing this pressure..
Features
*Full-opening formation testing in cased hole, oil tube tradition perforation, tube string testing and cycle operation in the conjunction of perforation and full-opening formation testing
* Make the test program simple and reduce the reconnoitering cost greatly.
Specification
| OD/In |
working pressure/Mpa |
service environment |
working temperature |
connection |
5"
3 7/8"
3 1/8" |
70/105 |
mud, curde oil, natural gas with H2S and acid |
-29ºC-204ºC |
EUE/IF/CAS |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}