WASHOVER AND CUTTING TOOLS
Marine Casing Cutter
Marine casing cutter is one of tools which cuts the casing internally. It uses water horsepower to drive cutters work, it has structure reasonable and convenient maintenance, faster cutting speed. When cutting multi-layer non- concentric casings, It could bear drastic shaking. Strong cutter arms can extend to 5 times as much as body diameter, so that get max stability performance under all kind of disadvantage cutting condition( including hard point, concentric, cutting discontinuity), such as 13-3/8" marine cutter body diameter is just 11-3/4", but the max cutting range of pipes reach 60".
Model |
OD min(inch) |
Conn. |
Casing OD |
Min (inch) |
Max (inch) |
GD111 |
111(4 3/8) |
2 7/8REG |
5 1/2 |
6 5/8 |
GD146 |
146(5 3/4) |
3 1/2REG |
7 |
16 |
GD203 |
203(8) |
NC50 |
9 5/8 |
30 |
GD238 |
238(9 3/8) |
6 5/8REG |
10 3/4 |
36 |
GD298 |
298(11 3/4) |
6 5/8REG |
13 3/8 |
60 |
How to Order:Sizes & connections;Please specify special requirements.
|
Mechanical Internal Cutter
Mechanical internal cutter is a tool which is used for cutting downhole fixed pipe from inner of casing, it can working in any place except joint and collar.
Specification
Model |
Casing/Tubing OD (inch) |
Cutter OD (mm) |
Cutting Thickness (mm) |
Conn. |
ND-73 |
2 7/8 |
57 |
5.5 |
1.9TBG |
ND-89 |
3 1/2 |
67 |
6.5 |
1.9TBG |
ND-102 |
4 |
85 |
5.7,6.7 |
2 3/8TBG |
ND-114 |
4 1/2 |
89 |
7.4~10.9 |
2 3/8TBG |
ND-127 |
5 |
102 |
5.59 - 11 |
2 7/8REG |
ND-140 |
5 1/2 |
120 |
7,7.7,9.2 |
NC31 |
ND-168 |
6 5/8 |
149 |
7.3 - 8.9 |
NC38 |
ND178 |
7 |
146 |
5.87~13.72 |
4 1/2REG |
ND244 |
9 5/8 |
212 |
7.92~13.84 |
6 5/8REG |
ND340 |
13 3/8 |
295 |
8.38~12.19 |
6 5/8REG |
ND473 |
18 5/8 |
440 |
11.05 |
6 5/8REG |
ND508 |
20 |
470 |
11.13~16.13 |
6 5/8REG |
How to order: Sizes & connections; |
Washover Pipe
Washover pipe is a necessary tool in washover operation which can relieve all kinds of sticking in the well. The function are rotating washover, flush the sand and sand salt, hot wash to stuck, etc.
Specification
Model |
OD mm(inch) |
Min. Hole Size (inch) |
Max. Washover Size (inch) |
Max. Tensile Load (KN) |
Sub Yield Torque (N.m) |
Sealed Pressure (MPa) |
TXG114.3-8.56 |
114.3(4 1/2) |
4 3/4 |
3 3/16 |
390 |
3490 |
20 |
TXG114.3-8.56 |
127(5) |
5 3/4 |
4 |
440 |
12202 |
20 |
TXG139.7-9.17 |
139.7(5 1/2) |
6 |
4 5/8 |
500 |
14914 |
20 |
TXG146.05-7.92 |
146.05(5 3/4) |
6 3/8 |
5 |
500 |
14914 |
20 |
TXG168.28-8.94 |
168.28(6 5/8) |
7 3/8 |
5 5/8 |
500 |
21693 |
15 |
TXG177.8-9.19 |
177.8(7) |
7 7/8 |
6 |
640 |
21693 |
15 |
TXG193.68-9.53 |
193.68(7 5/8) |
8 3/8 |
6 5/8 |
700 |
31183 |
15 |
TXG203.2-9.53 |
203.2(8) |
81/2 |
7 |
820 |
32539 |
15 |
TXG206.38-9.4 |
206.38(8 1/8) |
81/2 |
7 |
830 |
32539 |
15 |
TXG219.07-11.43 |
219.07(8 5/8) |
9 5/8 |
7 3/8 |
1100 |
47453 |
15 |
TXG228.6-10.8 |
228.6(9) |
9 7/8 |
7 7/8 |
1260 |
47453 |
15 |
TXG244.48-11.99 |
244.48(9 5/8) |
101/2 |
8 3/8 |
1450 |
67791 |
15 |
TXG273.05-11.43 |
273.05(10 3/4) |
11 7/16 |
9 3/8 |
1620 |
81349 |
15 |
TXG298.44-12.42 |
298.44(11 3/4) |
12 3/4 |
10 3/8 |
1800 |
108465 |
10 |
TXG339.72-13.06 |
339.72(13 3/8) |
14 3/8 |
11 7/8 |
2020 |
149140 |
10 |
TXG406.4-16.66 |
406.4(16) |
171/2 |
14 |
2500 |
254894 |
7 |
Washover Shoe
The Washover shoe is the kit tool for washover work, which is used for rock, dinas, cementing block around downhole fishes.
Specification:
Model |
OD mm(inch) |
Length mm(inch) |
Min. Hole Size mm(inch) |
Max. Washover Tools mm(inch) |
TX117 |
117.65(4 5/8) |
500~1000 (20 - 40) |
120.65(4 3/4) |
88.9(3 1/2) |
TX146 |
145.58(5 3/4) |
155.58(6 1/8) |
120.65(4 3/4) |
TX178 |
177.8(7) |
187.33(7 3/8) |
142.88(5 5/8) |
TX190 |
190.03(7 1/2) |
200.03(7 7/8) |
152.4(6) |
TX206 |
205.98(8 1/8) |
219.09(8 5/8) |
180.98(7 1/8) |
TX206 |
234.45(9 1/4) |
244.48(9 5/8) |
190.5(7 1/2) |
TX288 |
288.4(11 1/4) |
298.45(11 3/4) |
244.48(9 5/8) |
Drive Sub
The drive sub is a kit tool for washover work,which is usded in connecting drill pipe and washover pipe.
Specification:
Model |
OD mm(inch) |
ID mm(inch) |
Conn. |
JTB273 |
273(10 3/4) |
76.2(3) |
630x10-3/4"FJWP |
JTB219 |
219(8 5/8) |
71.4(2 13/16) |
410x8-5/8"FJWP |
JTB206 |
206.4(8 1/8) |
71.4(2 13/16) |
410x8-1/8"FJWP |
JTB194 |
193.7(7 5/8) |
57.2(2 1/4) |
310x7-5/8"FJWP |
JTB178 |
177.8(7) |
71.4(2 13/16) |
410x7"FJWP |
JTB146 |
146(5 3/4) |
50.8(2) |
210x5-3/4"FJWP |
WELLHEAD TOOLS
Lifting Sub
The Lifting sub is a tool for lifting down hole drilling tools such as drill collars,drill pipes etc.in oil,gas and geology field drilling operations.
The structure is devided to two types: "A" and "B". The shoulder of Type A is 18°,type B is 90°,which could be chosen according to the elevator structures. The connections should suit to the drill string which is connected to it. The lifting groove is clamped by elevator.
Specification: All sizes.
HOW to order: Sizes, shoulder type, connections;
P
lease specify special requirements.
Lifting Cap
Lifting Cap is a special tool for lifting drilling tools in oil,gas and exploration drilling project.
Specification: All sizes.
Mud Bucket(Saver)
The mud bucket issued for tripping the drill string, preventing polluting the platform by mud splash because of blocking when removing the drilling tools,to recycle the drilling fluid. The advantages are safe,convenience,clean and economy.
Specification:For 2 3/8"~ 6 5/8" DP.
Roller Kelly Bushing
Roller kelly bushing is one of the necessary tools for oil drilling operation, which is fixed at the big bushing to pass the torque to the down hole drilling tools.
According to the driving mode, it could be divided into square drive type and pin drive type. According to the kelly, there are square kelly bushing and hexagonal kelly bushing. It mainly consists of roof cover, bottom cover, axls pin, roller, fastening bolt and stals, etc.
There are four pieces of roller in the bushing which have needle bearing inside the rollers and fastened between roof and bottom cover by and pin and seals at both ends of rollers to prevent the drilling fluid from percolating. There is a stop pin fixed in the seal body to prevent rotating.
The axles of roller is fixed by four pieces of bolt M38 which tightening torque is 2KN-m. There are four hexnuts fixed the top of four large bolts with the covers tightly to avoid loosing.
Specification:
Model (inch) |
Bottom Seat |
Opposite Side mm(inch) |
Large End of the Taper mm(inch) |
Taper |
GBX3-1/2 |
332(13 1/16) (520 rotary table) 342(13 15/32) (17.5 rotary table) |
330(13) (520 rotary table) 332(13 1/16) (17.5rotary table) |
1:3 |
GBX4-1/4 |
GBX5-1/4 |
model
(inch) |
rotary size
(inch) |
drive hole OD
mm (inch) |
drive hole center distance
mm(inch) |
GBX 5-1/4" |
37 1/2" |
86.233 (3 25/64) |
654 (25 3/4) |
GBX 3-1/2" |
37 1/2" |
86.233 (3 25/64) |
654 (25 3/4) |
BJ Wiper
The wiper is one of the obbligato tools in downhole operation, which is used for cleaning mud on drill pipe outer surface to protect drill pipe outer surface cleaning, in order to make all drilling tools work normally.
Specification
Wiper OD (inch) |
Drill Pipe OD (inch) |
16 3/4 |
2 3/8,2 7/8,3 1/2,4,41/2, 5,5 1/2,5 7/8,65/8 |
How to order:
Sizes & connections;
Please specify special requirements.
U Wiper
Type u wiper is used for cleaning mud on the surface of drill string in drilling operation. The long working life could relieve labor intensity for workers, reduce danger of drill point operation step in order to make drill plate environment more clean,and it is easy to check crack and deal with hidden danger in time after cleaning drill string.
Specification:
Wiper OD (inch) |
Drill Pipe OD (inch) |
15 |
2 3/8,2 7/8,3 1/2,4, 4 1/2,5,5 1/2 |


