COILED TUBING TOOLS
The 'Torconnect,External Slip Connector has been primarily developed to withstand the most extreme high-torque, high-tensile applications.
Unlike existing slip connectors, the 'Torconnect' External Slip Connector does not rely on grub screws to transmit torque from the tool string through to the coiled tubing. This feature is provided through a unique non-rotational slip arrangement providing high bidirectional torque resistance. The slip is positively engaged into the bottom sub via drive teeth, therefore transmitting any rotational torque from the tool string directly to the pipe.
Design Features/Benefits:
- High tensile strength
- Non rotational
- Internal pressure seal
- Replaceable slips
| SPECIFICATIONS |
| Part Number |
Coiled Tubing Diameter |
Max OD |
Min ID |
Thread |
| (in) |
(in) |
(in) |
| D97-1125-100 |
11/4 |
1.687 |
0.75 |
1" AMMT |
| D97-1150-100 |
11/2 |
2.125 |
1.00 |
1.5"AMMT |
| D97-1175-100 |
13/4 |
2.375 |
1.00 |
| D97-1200-100 |
2.00 |
2.875 |
1.50 |
2 3/8" PAC |
| D97-1237-100 |
2 3/8 |
3.125 |
1.50 |
| D97-1287-100 |
2 7/8 |
3.625 |
1.50 |
2 7/8" PAC |
The 'Slimconnect' External Slip Connectors allows the attachment of coiled tubing to the CT Tool Work String via the provision of a threaded connection.
The 'Slimconnecf, as ifs name suggests, has an O.D. which is smaller than a standard 'Torconnecf. This enables the 'Slimconnecf to be used in operations where a maximum diameter of coiled tubing is required to be run in a minimal I.D. restriction.
The design of the 'Slimconnect,utilizes a set of helical 'wicker,type slips that grip the tubing in a 'wedging' action, thus, an increase in tension results in increased grip.
Design Features/Benefits:
- High tensile strength for size
- Slimline body O.D.
- Internal pressure seal
- Replaceable slips
| SPECIFICATIONS |
| Part Number |
Coiled Tubing
Diameter |
Max OD |
Min ID |
Thread |
| (in) |
(in) |
(in) |
| D97-1125-102 |
11/4 |
1.687 |
0.750 |
1" AMMT |
| D97-1150-102 |
11/2 |
2.125 |
1.000 |
1.5" AMMT |
| D97-1175-102 |
13/4 |
2.375 |
| D97-1200-102 |
2 |
2.875 |
1.500 |
2 3/8" PAC |
| D97-1237-102 |
2 3/8 |
3.125 |
1.500 |
TORCONNECr INTERNAL SLIP CONNECTOR
Unlike existing slip connectors, the 'Torconnect' Internal Slip Connector does not rely on grub screws to transmit torque from the tool string through to the coiled tubing. This feature is provided through a unique non-rotational slip arrangement providing high bidirectional torque resistance. The slip is positively engaged into the bottom sub via drive teeth, therefore transmitting any rotational torque from the toolstring directly to the pipe.
The basic installation to the coiled tubing does not require any specialized tooling or makeup torque. The connector is simply fitted to the pipe and an overpull taken to test and set the connector.
The Internal 'Torconnect,also has only 4 main components and includes an enclosed lock nut feature to prevent the connector from being jarred free from the pipe.
Both Internal and External versions of the 'Torconnect' Slip Connector feature an interchangeable service connection sub allowing the operator to easily change from one thread connection to another.
Because the 'Torconnect' can withstand extremely high tensile and torsional loads, it is ideally suited for high-end CT drilling, milling, under-reaming and fishing applications.
Design Features/Benefits
- High tensile strength
- Non rotational
- Internal pressure seal
- Replaceable slips
| SPECIFICATIONS |
| Part Number |
Coiled Tubing Diameter |
Max OD |
Min ID |
Thread |
| (in) |
(in) |
(in) |
| D97-1150-202 |
1 1/2*0.125 |
1.50 |
0.500 |
1" AMMT |
| D97-1175-202 |
1 3/4*0.134 |
1.75 |
0.625 |
| D97-1200-203 |
2*0.175 |
2.00 |
0.812 |
1.5"AMMT |
| D97-1237-201 |
2 3/8*0.175 |
2.375 |
1.000 |
Roll-on Connector
The Roll-on connector allows the attachment of coiled tubing to the CT tool/work string via the provision of the threaded connection.
The Roll-on connectors are available to suit all standard sizes of coiled tubing.
Design Featurs/Benefits:
-- High tensile strength
-- Internal pressure seal
-- Easy make up
Roll-on connector Crimping tool
The Roll-on connector crimping tool ensures easy field installation of the Roll-On Connectors to the coiled tubing.
The crimping tool has two interchangeable wheels, one of which is used to swage the coiled tubing onto the Roll-On connector. The other is cutting wheel which can be used to cut the coiled tubing.
| SPECIFICATIONS |
| Part Number |
Coiled Tubing Diameter |
Max OD |
Min ID |
Pressure |
Tensile
Strength |
Thread |
Crimping Tool Part Number |
| |
(in) |
(in) |
(in) |
Psi |
Lbs |
|
| D97-1125-300 |
1 1/4*1/8 |
1.500 |
0.50 |
|
25,000 |
1" AMMT |
|
| D97-1150-300 |
1 1/2*1/8 |
|
|
|
|
|
|
| D97-1150-304 |
1 1/2*0.102 |
1.500 |
0.75 |
|
35,000 |
1"AMMT |
|
| D97-1150-305 |
1 1/2*0.109 |
|
|
| D97-1150-306 |
1 1/2*0.156 |
|
|
|
|
|
|
| D97-1175-300 |
1 3/4*1/8 |
1.750 |
0.75 |
|
|
1" AMMT |
|
| D97-1175-304 |
1 3/4*0.175 |
10,000 |
45,000 |
D97-1150-301 |
| D97-1175-303 |
1 3/4*0.175 |
2.125 |
1.00 |
|
|
1.5" AMMT |
|
| D97-1200-300 |
2*0.188 |
|
|
|
65,000 |
|
|
| D97-1200-301 |
2"*0.145" |
2.000 |
1.00 |
|
60,000 |
1.5" AMMT |
|
| D97-1200-303 |
2"*0.175" |
|
65,000 |
|
| D97-1200-304 |
2"*0.156" |
|
|
|
60,000 |
|
|
| D97-1237-300 |
2 3/8"*0.175" |
2.375" |
1.00 |
|
60,000 |
1.5" AMMT |
|
DOUBLE ENDED ROLL-ON CONNECTOR
Double Ended Coiled Tubing Roll-On Connectors allow the inline attachment of two lengths of coiled tubing.
Double Ended Roll-On Connectors have the same outside diameter as the coiled tubing.
Double Ended Roll-On Connectors attach to the coiled tubing's internal diameter. The connector is secured by crimping the tubing into the connectors preformed channels with a Roll-On Connector Crimping Tool.
Design Features/Benefits:
- High tensile strength
- Internal pressure seal
- Easy make up
| SPECIFICATIONS |
| Part Number |
Coiled Tubing Diameter |
Max OD |
Min ID |
Pressure |
Tensile
Strength |
Crimping Tool Part Number |
| (in) |
(in) |
(in) |
Psi |
Lbs |
| D97-1125-302 |
1 1/4*1/8 |
1 1/4 |
0.500 |
10,000 |
23,000 |
D97-1150-301 |
| D97-1125-303 |
1 1/4*0.109 |
1 1/4 |
0.500 |
10,000 |
16,000 |
| D97-1150-302 |
1 1/2*1/8 |
11/2 |
0.750 |
10,000 |
25,000 |
| D97-1150-308 |
1 1/2*0.134 |
11/2 |
0.750 |
10,000 |
32,000 |
| D97-1175-305 |
1.75 *0.156 |
1.75 |
0.750 |
10,000 |
38,000 |
| D97-1200-302 |
2*0.175 |
2 |
1.000 |
10,000 |
45,000 |
| D97-1200-305 |
2 *0.156 |
2 |
1.000 |
10,000 |
42,000 |
| D97-1237-302 |
2 3/8*0.175 |
2 3/8 |
1.500 |
10,000 |
65,000 |
DIMPLE/GRUB SCREW CONNECTOR
The Grub Screw/Dimple Connector allows the attachment of coiled tubing to the CT Tool/ Work String via the provision of a threaded connection.
The connector is attached to the coiled tubing by grub screws that engage in preformed dimples in the tubing wall.
The dimples are formed by using the Dimple Hammer/Extractor Tool that places the indents in identical positions to the screws on the connector.
The Dimple/Grub Screw/ Connectors have 'o' ring pressure seals as standard and are also available with 'v' packings as an option to create the pressure seal.
Design Features/Benefits:
- High tensile strength
- Internal pressure seal
- Easy make up
- High Torque
| SPECIFICATIONS |
|
| Part Number |
Coiled Tubing Diameter |
Max OD |
Min ID |
Thread |
Dimple Hammer / Extrator
Tool Part Number |
| (in) |
(in) |
(in) |
| D97-1125-400 |
1 1/4 |
1.750 |
0.687 |
1" AMMT |
D97-1125-401 |
| D97-1150-400 |
11/2 |
2.125 |
1.000 |
1.5" AMMT |
D97-1150-401 |
| D97-1175-400 |
13/4 |
2.375 |
1.000 |
D97-1175-401 |
| D97-1200-400 |
2 |
2.875 |
1.500 |
2 3/8" PAC |
D97-1200-401 |
| D97-1237-400 |
2 3/8 |
3.125 |
1.500 |
2 3/8" PAC |
D97-1237-401 |
PULL PLATE FOR COIL CONNECTOR
The Pull Plate is used as an accessory with the Coil Tubing Connector. Once the Connector is installed on the coil, install the Pull Plate on to the connector.
This will allow the connector to enter the lubricator but the bottom of the pull plate will seat on the end of the lubricator, preventing further travel. Now apply the proper overpull to test the connector. The pull plate also prevents the connector from being pulled against the seals of the lubricator.
After a successful pull test, remove the pull plate and proceed with installing the remainder of the tool string. The pull plate can also be built with 3/16" hole and a tap for a needle and be used also as a test plug.
| SPECIFICATIONS |
| Part Number |
Max OD |
Min ID |
Thread |
| (in) |
(in) |
| D97-1125-110 |
5 |
0.75 |
1" AMMT |
| D97-1150-110 |
5 |
1.00 |
1.5"AMMT |
| D97-1237-110 |
6 |
1.50 |
2 3/8"PAC |
| D97-1238-110 |
6 |
1.50 |
2 3/8"REG |
| D97-1287-110 |
6 |
1.50 |
2 7/8"PAC |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}